Posts
Reputation
Age
Location
Posted 6/26/2014, 11:38 pm
**** THIS SOFTWARE WRITES TO THE PS3 EEPROM – USE AT YOUR OWN RISK ****
After having to QA a few PS3 in a row. Then installing a different firmware straight after, it was time to cut out the middleman.
Toggle QA will SET/RESET the QA Flag and Token on any 3.41 or 3.55 firmware that has lv1 mmap and lv2 peek and poke patches (which is most of them).
When you run the app it first detects if the PS3 is 3.41 or 3.55. Next it will check if your firmware has any of the required lv1 patches already and only patch the hypervisor with the ones you need. After it finishes patching Toggle QA will check the status of the QA Flag and SET/RESET it accordingly. Then once the QA SET/RESET is done any lv1 patches made will be removed.
HOW TO USE:
1: Install toggle_qa.pkg
2: Run Toggle QA from XMB
3: PS3 will beep and return to XMB. (If you do not hear a beep it has not worked)
NOTE: Every now and then it will hang on the lv1 patching stage. If it has not beeped and returned to the XMB after about 30secs you will need to reboot and try again.
Enjoy.
~ Codename: REBUG
Credit and Thanks:
Big thanks to graf and glevand for the hypervisor work.
Everyone involved in getting the QA Flag/Token working back many moons ago.
LINKS AND MD5 CHECKSUM: Download Link Mirror
After having to QA a few PS3 in a row. Then installing a different firmware straight after, it was time to cut out the middleman.
Toggle QA will SET/RESET the QA Flag and Token on any 3.41 or 3.55 firmware that has lv1 mmap and lv2 peek and poke patches (which is most of them).
When you run the app it first detects if the PS3 is 3.41 or 3.55. Next it will check if your firmware has any of the required lv1 patches already and only patch the hypervisor with the ones you need. After it finishes patching Toggle QA will check the status of the QA Flag and SET/RESET it accordingly. Then once the QA SET/RESET is done any lv1 patches made will be removed.
HOW TO USE:
1: Install toggle_qa.pkg
2: Run Toggle QA from XMB
3: PS3 will beep and return to XMB. (If you do not hear a beep it has not worked)
NOTE: Every now and then it will hang on the lv1 patching stage. If it has not beeped and returned to the XMB after about 30secs you will need to reboot and try again.
Enjoy.
~ Codename: REBUG
Credit and Thanks:
Big thanks to graf and glevand for the hypervisor work.
Everyone involved in getting the QA Flag/Token working back many moons ago.
LINKS AND MD5 CHECKSUM: Download Link Mirror
